eng | рус

Chevrolet » Series 40 / 50 / 60 '67

In 1967, Chevrolet presented all-new generation of medium and high duty truck lines. These trucks received a new 96" BBC cabs with the design in a style of light-duty models. The compact design of these new short-conventionals allowed the same cab-to-axle dimensions as those of last year's models with wheelbases that were 8 inches shorter. This means that short overall lengths and excellent maneuverability formerly available only with expensive low-cab-forward models, now can be used in conventional design. Gasoline-powered models could be ordered with in-line six or V8 engines. Horsepower ratings ranged from 155 for the 250 Six up to 220 for the 366 V8. Three series (Chevy C40, Chevy C50 and Chevy C60) were available in a total of 24 models with GVW ratings from 10,500 to 27,500 lbs, GCW ratings to 45,000 lbs. Diesel models with horsepower ratings from 130 for the 4-53N Detroit Diesel up to 170 for the DH478 Torq-Flow were offered in the 50 and 60 series. GVW ratings from 16,000 to 27,500 lbs. There were 6 variants of wheelbases: 125" (models 41000, 51000, 61000), 137" (models 41200, 51200, 61200), 149" (models 41400, 51400, 61400), 167" (models 41700, 51700, 61700), 189" (models 52000, 62000) and 203" (model 62300).

Chevy's tandem models were available in two basic types - Chevy C50 trailing axle tandems with GVW ratings to 30,000 lbs., and Chevy C60 dual-drive tandems with GVW ratings to 45,000 lbs. Chevy C50 tandems were available in three wheelbases with a choice of three gasoline engines - 292 Six, 327 V8 and 366 V8. The standard boogie assembly was rated at 28,000 lbs. and was equipped with hydraulic brakes. Chevy C60 tandems were powered by 366 V8 gasoline or DH-478 diesel engines. Tandem rear axle assemblies with ratings of 30,000 or 34,000 lbs. with vacuum-hydraulic or full-air brakes. In 1968, a new 427 cubic inch V8 engine and 23,000 lbs rear axle options for Chevy C60 permitted GCW ratings to 60,000 lbs. The model range got only slight changes in 1969, 1970, 1971, 1972 and 1973.


Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1967 Chevy C401968 Chevy C401969 Chevy C401970 Chevy C40
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1971 Chevy C401972 Chevy C401967 Chevy C501968 Chevy C50
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1969 Chevy C501970 Chevy C501971 Chevy C501972 Chevy C50
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1973 Chevy C50Chevrolet C50Chevrolet C501967 Chevy C60
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1968 Chevy C60 Dump Truck1969 Chevy C60 Dump Truck1970 Chevy C60 Dump Truck1971 Chevy C60
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
1972 Chevy C60 Dump Truck1973 Chevy C60Chevrolet C60 Dump TruckChevrolet C60
Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67Series 40 / 50 / 60 '67
Chevrolet C60 Dump TruckChevrolet C60Chevrolet C60
  1. Rick
    2012-04-17 18:53:45

    I need some help trying to change out the manual steering to power steering.
    This is on a 1967 c/50 truck, powered by a 350.Any I ideas ?
    Thanks ,
    Rick

  2. Mac McGrail
    2014-07-18 22:37:37

    Need rear Brake drums for 1971 C40 .
    Original Chevrolet part number 3990073

  3. Dave
    2014-09-07 05:58:03

    I have a 67 rear with tires and drums come pick it up

  4. scott
    2015-12-04 19:56:55

    --does anyone know of a place that makes and sells new sheet metal for a c-50 chevy truck, like the fenders, fender extensions, step etc. ?

  5. Brian
    2016-01-28 11:38:11

    I have a 1978 Chevy Bonanza. vin tag states its a camper loading, C G data, series 40. What does the series 40 mean?

  6. MIKE
    2016-04-23 21:47:35

    Trying to find parts for my dads 69 chevy dump. we have called and looked online but everything only shows c30 or smaller. his is a c50 and we are looking for wheel cylinders for the rear. Any information on where to find parts would be appreciated thanks.

  7. carl
    2016-05-04 10:43:04

    I have a1969 c 60 73,000 miles 2spd rear and 5spd low hole trany make offer I don't want a hole lot it needs a good home

  8. Dennis
    2016-05-09 17:28:05

    Need the part number off of radiator on 1972 C60 Chevy with 366 motor.

  9. Bobby Simpson
    2016-06-05 14:55:16

    I have a 1971 c40 need master cylinder

  10. Ron
    2016-08-24 18:51:30

    Wheel cylinders for 72 c60 oddly i went to summit racing then, to doorman application online. Ordered from summit, took a little time but, great price for new wheel cylinders.

  11. Mike
    2016-09-26 20:18:54

    Yo Carl where are u located? Still wanting to get rid of 69 c60

  12. Anthony
    2016-11-24 06:59:42

    My friend gave me a motor but still in his truck I do have the vin number. can some one help me figure out what motor it has please TCE617V572537 is vin # it's in a Chevy 6000 I'm not sure the year

Add comment


код

Follow us

Database search

Brand:

Country:

Type:
 

Unknown models:


Do you know? View all »

Recent Comments:

American LaFrance » Type 12 / 20 / 34 to 56 / 69 to 75 / 80 / 85 / 90

would like info on setting timing on 1925 American LaFrance-12. 6 cylinder in line engine. Has Magneto and distributor. Where should the advance lever be positioned for setting timing? How many degree of timing does the engine require 34, 36, 38 degrees Before Top Dead Center. Should the engine be started with any of the compression valves opened? Need this info for a Christmas parade in Titusville, Fl. Thanks for any help. Richard Burns, fire Chief's father in law.

Volvo » FM 3rd generation

The Euro 4-equipped Volvo FM will be manufactured locally in the Philippines during their groundbreaking for build a factory.

DAC » 2.65FAEG

Cine fabrica DAC 2.65 FAEG?

American LaFrance » Type 12 / 20 / 34 to 56 / 69 to 75 / 80 / 85 / 90

Hi! Where I can download the XRumer 12? This URL is not working - http://freecheapxrumer.com/ :(